1. Tier #-Adsorption isotherms and desorption kinetics/desorption isotherms

2. Adsorption isotherms

3. Results from the adsorption isotherms experiment

4. Graphical representations of adsorption isotherms are provided

5. n= slope of Freundlich adsorption isotherm

6. The article also researches other questions such as: the determinating of dead space, whether the adsorption isotherm according with the desorption isotherm.

7. Equilibrium adsorption data obeyed both Langmuir and Freundlich isotherms.

8. Steel Brandered ceilings with 9mm Rhinoboard with 100mm Isotherm

9. Key words: cadmium removal, water, Tamrix leaves, adsorption isotherm.

10. The parameters of adsorption isotherm and kinetics are calculated.

11. Isotherms connect locations that have the same temperature.

12. Weakly Adsorbed), is the Langmuir isotherm (1)

13. Key words: adsorption isotherm of HAP, aluminium hydroxide.

14. The force-area isotherms show real-gas and liquid analogous states.

15. The adsorption can be described by one-constant virial isotherm.

16. Adsorption isotherms in all three cases follow the Langmuir equation.

17. Key words: organophilic clay, adsorption, hazardous wastes, solidification/stabilization, isotherm.

18. An isotherm is a pressure-volume plot at constant temperature.

19. Keywords: hydrogen evolution, adsorption, heterogeneous surfaces, distributed kinetics, Frumkin/Temkin isotherm.

20. An adsorption isotherm is introduced for two competitive adsorptive substratesA andB.

21. Dye adsorption can be described by a multilayer adsorption isotherm curve.

22. Nitrogen adsorption–desorption isotherms on the calcined samples have been measured.

23. Adsorption–desorption isotherms and isothermal calorimetric heats of adsorption were measured.

24. The adsorption processes were best described by the Freundlich isotherm.

25. This feature is also pointed out with water vapour desorption and adsorption isotherms.

26. From the adsorption isotherms we computed the thermodynamic adsorption parameters according toFrumkin andDamaskin.

27. ExplicIt'solutions are presented for the linear and Smith forms of the isotherm equations.

28. Key words: adsorption isotherm, electrocatalytic hydrogenation (ECH), cyclohexanone, aluminum oxide – hydroxide powders.

29. The software for analysing the sorption and desorption isotherm of paddy was presented.

30. Key words: adsorption, Cr(VI), batch studies, tamarind seeds, kinetics, isotherms, wastewater.

31. Therefore, it was probable that they are obeying the Langmuirs adsorption isotherm.

32. The adsorption process of Cr(VI) was tested with Langmuir and Freundlich isotherm models.

33. These results were compared with those obtained using the Frumkin/Temkin adsorption isotherm.

34. This conclusion is supported by adsorption isotherms, cryoscopic, infra-red and deflocculation tests.

35. Adsorption on unisorptic `patches' may be described by a choice of model isotherm functions.

36. Note that an isotherm that is favorable for Adsorption is unfavorable for desorption

37. Sulfur dioxide adsorption isotherms on all gels at 423 °K obeyed the Langmuir equation.

38. Adsorption isotherms of the Adsorbates delineate the nature of binding of the Adsorbate with silica

39. The adsorption isotherm of water is convex towards the vapour pressure axis.

40. A numerical procedure is used to calculate the water activity for nonlinear isotherm equations.

41. A new excess isotherm is derived for multilayer adsorption from binary liquid mixtures on solid surfaces.

42. The adsorption behavior of ammonia nitrogen by mordenite fits the Langmiur isotherm well.

43. A derivation of theJavanović isotherm for mono and multilayer adsorption of gaseous mixtures was obtained.

44. The parameters of theFrumkin and virial isotherms were determined in the range of strong adsorption potentials.

45. It was proved that the partial adsorbed quantities can be calculated from the individual adsorption isotherms.

46. The maximum adsorption capacity of sawdust for Pb++ and Ni++ were calculated from the Langmuir isotherms.

47. Through the adsorbing experiment of phenol, the phenol - adsorption isotherm of the gangue - based adsorbent was obtained.

48. The equilibrium nature of humic acid adsorption was described by the Langmuir, Freundlich and BET isotherms.

49. A mathematical model of adsorption of phenol in soil has been studied using linear adsorption isotherm.

50. Methylene blue (Cl−) dye adsorption isotherms were measured on these three minerals prepared in the sodium form.

51. The adsorption isotherms, and resulting thermodynamics, for both adsorbates were similar over the entire pressure range studied.

52. In first approximation the equilibrium isotherms are verified by taking off the acids from the 6-polyamide.

53. For films stabilized by soluble molecules we can use, by direct or indirect means, theGibbs adsorption isotherm.

54. Pore size - pore volume distributions of different activated carbons made in China and abroad adsorption isotherm methods.

55. The ultimate in favorable isotherms is irrevers-ible Adsorption, where maximum Adsorption is reached at very low partial pressures

56. Determination of Freundlich adsorption isotherms to determine the influence of concentration on the extent of adsorption on soils

57. The adsorption isotherm was evaluated on the basis of the Brunauer, Emmett and Teller (BET) theory.

58. A general method for evaluating the energy distribution function from the experimental adsorption isotherm is presented.

59. The adsorption of As(V) onto the PA was found to have followed the Langmuir isotherm.

60. An isotherm is a line on a map that joins locations having the same mean temperatures.

61. Six sulfur hexafluoride isotherms for temperatures between 0.0018 K and 0.0281 K above the critical temperature are plotted.

62. Adsorption followed the Langmuir isotherm, with an adsorption capacity of 36 mg tannin and lignin/g silt loam.

63. The method is based on the analysis of aGraham plot which reflects the adsorption isotherm deviations from ideality.

64. The dynamic gas chromatography step profile method was used to determine isotherms of adsorption and desorption from the TG curve.

65. The adsorption of these compounds on carbon steel in 1 mol/L HCl obeyed Langmuir's adsorption isotherm.

66. Application of the Langmuir isotherm to the systems yielded maximum adsorption capacity of 29.08 mg g–1.

67. Adsorption isotherm was obtained by applyingGibbs adsorption equation to the curve, and the pressure vs. area curve was plotted.

68. In the systems acetanilid:2,4-dinitrophenol; azobenzene:benzil; and anesthesin: benzil, the isotherms of the crystallization velocity with undercooling were determined.

69. From the adsorption isotherm some thermodynamic data for the adsorption process (ΔG°ads. andf) are calculated and discussed.

70. The theoretical multilayer adsorption isotherms corresponding to these models have been calculated for differing degrees of mobility of the first layer.

71. Moisture adsorption isotherms show low equilibrium moisture content in esterified wood at all relative humidity values as compared to a control.

72. Equilibrium Adsorption and desorption isotherm data at room temperature are reported for cyanogen chloride and hydrogen cyanide vapors on …

73. The NIST/ARPE-E Database of Novel and Emerging Adsorbent Materials is a catalog of adsorption measurements, including isotherms for offline analysis

74. Sorption experimentsPhysisorption experiments were done on an ASAP 2100 physisorption apparatus to obtain isotherms of N2 adsorption and BET surface areas of the samples.

75. The adsorption rate of cyanide on D296R alkaline anion exchange resin was measured, the adsorption isotherm drawn and the thermodynamic function of the adsorption process deduced.

76. But the calculated mean energy of adsorption, E, from the D-R isotherm, gives information about the chemical or physical properties of the sorption.

77. For equal ranges of wood moisture, swelling is not constant; after desorption swelling is higher than during adsorption; hysteresis occurs, as is the case for sorption isotherms.

78. The isotherms are straight and vertical, isobars are straight and horizontal and dry adiabats are also straight and have a 45 degree inclination to the left while moist adiabats are curved.

79. It is explained how the classical model of the structure of hardened Portland cement paste was deduced by T.C. Powers and coworkers from data on water vapor adsorption isotherms.

80. The objective of this study was to compare the adsorption behavior of arsenite and Arsenate on ferrihydrite, under carefully controlled conditions, with regard to adsorption kinetics, adsorption isotherms, and the influence of